isuCAD
WATER SUPPLY NETWORK DESIGN SOFTWARE
Drawing / Modelling / Planning / Design / Analyze / Simulation
Since 1985, AnkiSOFT Software developes software to design infrastructure projects. isuCAD has been developed for water supply (drinking water) network design. It is for Drawing / Modelling / Planning / Design / Analyze / Simulation of the water supply network. The software works under AutoCAD or ZWCAD.
AnkiSOFT Software– isuCAD – Water Supply Network Design Software – Menu of the Software
DRAWING the NETWORK
Design/analyze method can be DEAD-END or HARDY-CROSS. For the HARDY-CROSS method, the software works with EPANET 2.0.
It is possible to arrange the drawing style by using STYLE MANAGER, so you can use different drawing style in different projects.
OPEN LAYER command can open all the necessary layers that the software needs.
You can define/draw/edit/delete/move Demand Node (DN), can change some/all properties of DNs. The software will write; DNno and the ground elevation for each DN on the drawing.
You can find any DN by searching the DNno, can change the location of DNno, can renumber some/all DNnos from a specified number.
You can define/draw/edit/delete pipes, can change the direction of pipes, can change some/all properties of pipes. The software will write; diameter, length and length-coefficient for each pipe on the drawing.
You can define/draw/delete embedded reservoir, elevated reservoir, pump-station, hydrophore.
You can define/draw/delete point-discharge to any pipes.
Our software produces EPANET.INP file. You can use it in EPANET or WaterCAD directly. And also, if you have any EPANET.INP file exported from EPANET or WaterCAD, you can transfer all the network and information to our software directly too.
Water Supply Network – Network Model
ERROR CHECKING
You can check weather there is any mistake in the network model. You can find and you can correct them.
Such as; same DNnos, 1st-phase – 2nd-phase – existing pipe connections, pipe connections from/to DNs.
DESIGN CRITERION
You can define;
• Elevation of coming pipe to the reservoir
• Bottom elevation of the reservoir
• Allowable minimum-operation-pressure for the network
• Allowable maximum-static-pressure for the network
• Peak factor for the network
• Fire discharge values and minimum pipe diameters for main, primary and secondary pipes
• For each Type-DIAMETER; type-name, material (concrete, reinforced concrete, PVC, ACB, Steel, HDPE, Ribloc, …), inner diameter, allowable maximum velocity, design formula (William Hazen, Ludin, …), “C” values (roughness coefficient) for the formula.
HYDRAULIC DESIGN
During design works; all the information on the drawing will be send to calculation, the calculation software will do hydraulic calculations, then all the calculated information will be send back to the drawing to show the final situation.
You can repeat this process, until you reached to the situation that you want.
STEADY STAYE ANALYSIS
Steady State Analysis depends on maximum hourly pik demand.
During analiysis, the software recommends diameter for the pipes. The software also informs you about the pipes having higher velocity and pressures than design-criterion.
WATER SUPPLY NETWORK SIMULATION (Extended Period Simulation, EPS)
Water Supply Network Simulation starts when the water tank is full. A pattern having 72-hours can be used.
During simulation, the software recommends diameter for the pipes. The software also informs you about the pipes having higher velocity and pressures than design-criterion.
DESIGN CALCULATION TABLES
Hydraulic calculations are in the form of tables and recorded in a text file.
• DNno at the start
• DNno at the end
• Phase number
• Pipe length
• Length-coefficient
• Relative pipe length
• Qpipe, Qstart, Qend, Qaverage, Qtotal, Qfire and Qdesign
• Selected diameter
• Head loss per meter
• Velocity
• Total headloss
• Piezometric elevation at end DN
• Ground elevation at end DN
• Pressure head at end DN
• Remark for each pipe
Next table contains; pipe lengths according to pipe diameter and phase of pipe.
The last table contains; excavation amounts according to excavation depth and phase of pipe.
CALCULATION PLAN
You can prepare calculation plan from network model. In this plan you can see, pipe directions, pipe lengths, pipe diameter and pipe length-coefficients.
You can prepare the plan by the use of only one command in a very short time.
Water Supply Network – Calculation Plan (1/2000)
CONSTRUCTION PLAN
You can arrange primary/secondary pipe separation valves automatically. You can define/delete valve at start/end of pipes, can add/delete water-drain-valves at desired DNs, can define/delete fire-hydrants on pipes.
You can prepare the plan by the use of only one command in a very short time.
Water Supply Network – Construction Plan (1/2000)
GENERAL LAYOUT PLAN (1/5000)
The software will show main and primary pipes and DNnos automatically. Also, you can decide for other pipes/DNs to show on general layout plan.
Then, you can prepare general layout plan in a very short time.
Water Supply Network – General Layout Plan (1/5000)
NODE DETAIL DRAWING
All of the fittings are recorded in a text file for you. You can add/delete your fittings to that file, can change the appearance order, so you can show your own style.
Typical DN details and the fittings are recorded in a text file for you too. You can add/delete to typical DN details, can change appearance order, so you can show your own style.
Shortly, you can teach the fittings and the usage of them to the software. After then, the software will prepare DN detail drawing in this way.
In the drawings;
• There will be an empty place on the right side of the drawing for legend.
• There will be a border line for the drawing, also another border line for cutting.
• The output is in DXF file format.
Water Supply Network – Node Details
FITTINGS LIST DRAWING
Everything will be ready after DN detail drawing works. It is easy for you to prepare fittings list drawing. The only thing that you have to do is; to select the phase and to use our command for each of your selection.
In the drawings;
• There will be an empty place on the right side of the drawing for legend.
• There will be a border line for the drawing, also another border line for cutting.
• The output is in DXF file format.
Water Supply Network – List of Fittings
INFORMATION TRANSFER
You can transfer easily all the network information to another drawing/computer, or vice versa.
GENERAL
• There is no limit to the number of DNs and pipes.
• There is no limit to the number of dead-end-nodes.
• There is no limit to the number of pipe diameters and pipe materials.
• It is possible to have more than one network on the same drawing. There is no limit to the number of networks.
• It is possible to define different discharge zones, different length-coefficient zones.
• It is possible to define 1st-phase, 2nd-phase and existing pipe.
• During design works; it is possible to change pipe diameter.
• During design works; the software can show the logical mistakes of the network to the user to correct them.
• It is possible to see the DNs having less pressure than allowable-minimum-operation pressure and having higher pressure than allowable-maximum-static pressure.
• It is possible to see pressure difference at dead-end-nodes.
• At the end of the hydraulic calculation, software will supply excavation amounts and pipe lengths.
• The software can prepare classified pipe list according to phase, diameter and material.
• The software can renumber DN numbers automatically.
• All calculations are in a text file, in the form of tables. You can open, you can copy, you can print directly at any time.
• You can print the above text files by using an A4-printer with the help of our software commands too.
• You can use our software commands with AutoCAD or ZWCAD commands too.
UPGRADE HISTORY
JANUARY.2023
AutoCAD 2021 x64, ZWCAD 2024 x64
Windows11 x64, Windows10 x64
.NET Framework 4.8
Sentinel HL Pro Driverless, Sentinel-LDK_SDK_9.0 x64
EPANET 2.0 x32
JANUARY.2021
AutoCAD 2021 x64, ZWCAD 2022 x64
Windows8.1 x64, Windows8.0 x64, Windows7 x64
.NET Framework 4
Sentinel HL Pro Driverless, Sentinel-LDK_SDK_7.6 x64
EPANET 2.0 x32
JANUARY.2018
AutoCAD 2018 x64, ZWCAD 2018 x64
Windows7 x64, Windows8.0 x64, Windows8.1 x64, Windows10 x64
Sentinel HASP HL Pro Driverless, Sentinel-LDK_SDK_7.6 x64
EPANET 2.0 x32
MAY.2017
AutoCAD 2017 x64, ZWCAD+ 2015 x64
Windows7 x64, Windows8.0 x64, Windows8.1 x64, Windows10 x64
Sentinel HASP HL MaxMicro Driverless, Sentinel-LDK_SDK_7.1 x64
EPANET 2.0 x32
JANUARY.2015
AutoCAD 2015 x64, ZWCAD+ 2015 x64
Windows7 x64, Windows8.0 x64, Windows8.1 x64
Sentinel HASP HL MaxMicro Driverless, Sentinel-LDK_SDK_7.1 x64
EPANET 2.0 x32
JANUARY.2013
AutoCAD 2013 x64
Windows7 x64
Sentinel HASP HL Max, Sentinel-HASP_SDK_5.12 x64
JUNE.2012
AutoCAD 2012 x64
Windows7 x64, Windows8.0 x64, Windows8.1 x64
Sentinel HASP HL Max, Sentinel-HASP_SDK_5.12 x64
JANUARY.2012
AutoCAD 2012 x32, ZWCAD 2012
Windows7 x32
Sentinel HASP HL Max, Sentinel-HASP_SDK_5.12 x64
JANUARY.2010
AutoCAD 2010 x32
WindowsXP x32
Aladdin HASP HL Max, Ver1.1 x32
JANUARY.2009
AutoCAD 2008 x32
WindowsXP x32
Aladdin HASP HL Max, Ver1.1 x32
JANUARY.2003
AutoCAD 2004 x32
WindowsXP x32
JANUARY.1986
MSDOS