Water Supply Network Design Software

Water Supply Network Design Software

 

isuCAD

WATER SUPPLY NETWORK
Drawing/Modelling/Planning/Design/Analyse Software

 

 

AnkiSOFT Yazılım Water Supply Network Design Software Menu

 

 

DRAWING THE NETWORK

AnkiSOFT Yazılım's water supply (drinking water) network hydraulic design software, isuCAD; is developed for water supply network of infrastructure projects. It is for to draw/modelling/planning/design/analyse the water supply network under AutoCAD or ZWCAD.

Design/analyse method can be DEAD-END or HARDY-CROSS. For the HARDY-CROSS method, the software works with EPANET 2.0.

It is possible to arrange the drawing style by using STYLE MANAGER, so you can use different drawing style in different projects.

OPEN LAYER command can open all the necessary layers that the software needs.

You can define/draw/edit/delete/move Demand Node (DN), can change some/all properties of DNs. The software will write; DNno and the elevation for each DN on the drawing.

You can find any DN by searching the DNno, can change the location of DNno, can renumber some/all DNs from a specified number.

You can define/draw/edit/delete pipes, can change the direction of pipes, can change some/all properties of pipes. The software will write; diameter, length and length-coefficient for each pipe on the drawing.

You can define/draw/delete embedded reservoir, elevated reservoir, pump-station, hydrophore.

You can define/draw/delete point-discharge to any pipes.

 

CHECKING

You can check weather there is any mistake in the network model. You can find and you can correct them.

Such as; same DNnos, 1st-phase - 2nd-phase - existing pipe connections, pipe connections from/to DNs, pipes going from lower elevations to higher elevation.

 

HYDRAULIC CALCULATIONS

During design works; the Network-Drawing-Software will work together with the Hydraulic-Calculation-Software.

To do this; all the informations on the drawing will be send to calculation, the calculation software will do hydraulic calculations, then all the calculated informations will be send back to the drawing to show the final situation.

You can repeat this process, untill you reached to the situation that you want.

 

DESIGN CRITERION

You can define;
Elevation of coming pipe for the reservoir
Bottom elevation of the reservoir
Allowable minimum-operation-pressure for the network
Allowable maximum-static-pressure  for the network
Peak factor for the network
Fire discharge values and minimum pipe diameters for main, primary and secondary pipes
For each pipe; type-name, material (concrete, reinforced concrete, PVC, ACB, Steel, HDPE, Ribloc, ...), inner diameter, allowable maximum velocity, design formula (William Hazen, Ludin, ...), "C" values (roughness coefficient) for the formula.

 

 

DESIGN CALCULATION TABLES

Hydraulic calculations are in the form of tables and recorded in a text file.
Start DNno
End DNno
Phase number
Pipe length
Length-coefficient
Relative pipe length
Qpipe, Qstart, Qend, Qaverage, Qtotal, Qfire and Qdesign
Selected diameter
Head loss per meter
Velocity
Total headloss
Piezometric elevation at end DN
Ground elevation at end DN
Pressure head at end DN
Remark for each pipe
 

Next table contains; pipe lengths according to pipe diameter and phase of pipe.

The last table contains; excavation amounts according to excavation depth and phase of pipe.

 

CALCULATION PLAN

You can prepare calculation plan from network model. In this plan you can see, pipe directions, pipe lengths, pipe diameter and pipe length-coefficients.

You can propare the plan by the use of only one command in a very short time.

 

CONSTRUCTION PLAN

You can arrange primary/secondary pipe seperation valves automatically. You can define/delete valve at start/end of pipes, can add/delete water-drain-valves at desired DNs, can define/delete fire-hydrants on pipes.

You can propare the plan by the use of only one command in a very short time.

 

GENERAL LAYOUT PLAN (1/5000)

The software will show main and primary pipes and DNnos automatically. Also, you can decide for other pipes/DNs to show on general layout plan.

Then, you can prepare general layout plan in a very short time.

 

NODE DETAIL DRAWING

All of the fittings are recorded in a text file for you.  You can add/delete your fittings to that file, can change the appearance order, so you can show your own style.

Typical DN details and the fittings are recorded in a text file for you too. You can add/delete to typical DN details, can change appearance order, so you can show your own style.

Shortly, you can teach the fittings and the useage of them to the software . After then, the software will prepare DN detail drawing in this way.

In the drawings;
There will be an empty place on the right side of the drawing for legend.
There will be a border line for the drawing, also another border line for cutting.
The output is in DXF file-type.

 

FITTINGS LIST DRAWING

Everything will be ready after DN detail drawing works. It is easy for you to prepare fittings list drawing. The only thing that you have to do is; to select the phase and to use our command for each of your selection.

In the drawings;
There will be an empty place on the right side of the drawing for legend.
There will be a border line for the drawing, also another border line for cutting.
The output is in DXF file-type.

 

INFORMATION TRANSFER

You can transfer easily all the network informations to another drawing/computer, or vice versa. 

 

GENEL

There is no limit to the number of DNs and pipes.
There is no limit to the number of dead-end-nodes.
There is no limit to the number of pipe diameters and pipe materials.
It is possible to have more than one network on the same drawing. There is no limit to the number of networks.
It is possible to define different discharge areas, different length-coefficient areas.
It is possible to define 1st-phase, 2nd-phase and existing pipe.
During design works; it is possible to change pipe diameter.
During design works; the software can show the logical mistakes of the network to the user to correct them.
It is possible to see the DNs having less pressure than allowable-minimum-operation pressure and having higher pressure than allowable-maximum-static pressure.
It is possibe to see pressure difference at dead-end-nodes.
At the end of the hydraulic calculation, software will supply excavation amounts and pipe lengths.
The software can prepare classified pipe list according to phase, diameter and material.
The software can renumber DN numbers automatically.
All calculations are in a text file, in the form of tables. You can open, you can copy, you can print directly at any time.
You can print the above text files by using a A4-printer with the help of our software commands too.
You can use our software commands with AutoCAD or ZWCAD commands too.

 


SAMPLE DRAWINGS

Water Supply Network Construction Layout Plan (1/2000)
Sample 1: Water Supply - Network Construction Layout Plan (1/2000)
 
 
Water Supply Network Calculation Layout Plan (1/2000)
Sample 2: Water Supply - Network Calculation Layout Plan (1/2000)
 
 
Water Supply Network General Layout Plan  (1/5000)
Sample 3: Water Supply - Network General Layout Plan (1/5000)
 
 
Water Supply Node Detail Drawing
Sample 4: Water Supply - Node Detail Drawing
 
 
Water Supply Fittings List Drawing
Sample 5: Water Supply - Fittings List Drawing
 
 
SAMPLE OF CALCULATION OUTPUT FILES

Sample of Hydraulic Calculation Table

 

 

UPGRADE HISTORY

JANUARY.2018
AutoCAD 2018 x64, ZWCAD 2018 x64
Windows7 x64, Windows8.0 x64, Windows8.1 x64, Windows10 x64
Sentinel HASP HL Pro Driverless, Sentinel-LDK_SDK_7.6 x64
 
MAY.2017
AutoCAD 2017 x64, ZWCAD+ 2015 x64
Windows7 x64, Windows8.0 x64, Windows8.1 x64, Windows10 x64
Sentinel HASP HL MaxMicro Driverless, Sentinel-LDK_SDK_7.1 x64
EPANET 2.0 x32

JANUARY.2015
AutoCAD 2015 x64, ZWCAD+ 2015 x64
Windows7 x64, Windows8.0 x64, Windows8.1 x64
Sentinel HASP HL MaxMicro Driverless, Sentinel-LDK_SDK_7.1 x64
EPANET 2.0 x32
To Transfer the Network Informations to EPANET or WATERCAD
To Transfer the Network Informations from EPANET or WATERCAD
 
JANUARY.2013
AutoCAD 2013 x64
Windows7 x64
Sentinel HASP HL Max, Sentinel-HASP_SDK_5.12 x64
 
JUNE.2012
AutoCAD 2012 x64
Windows7 x64, Windows8.0 x64, Windows8.1 x64
Sentinel HASP HL Max, Sentinel-HASP_SDK_5.12 x64
 
JANUARY.2012
AutoCAD 2012 x32, ZWCAD 2012
Windows7 x32
Sentinel HASP HL Max, Sentinel-HASP_SDK_5.12 x64
 
JANUARY.2010
AutoCAD 2010 x32
WindowsXP x32
Aladdin HASP HL Max, Ver1.1 x32

JANUARY.2009
AutoCAD 2008 x32
WindowsXP x32
Aladdin HASP HL Max, Ver1.1 x32

JANUARY.2003
AutoCAD 2004 x32
WindowsXP x32

JANUARY.1986
MSDOS

Etiketler: isuCAD Network Design Water Supply Design Water Supply Network drawing software modelling software design software analyse software infrastructure software